The Loom WiFi Extender provides wider coverage to a great extent. Its high-speed connection can connect to all the corners of the house. Simply push the WPS button and it is ready to connect with the existing wireless connection. Moreover, its high-speed antennas provide an advanced central processor. Along with that, it has an Ethernet or the LAN port that is ready to connect to the wired device and spread the network connection to all the corners of the house. Moreover, it is designed especially for those who own large houses. As it has the capability to cover larger distances effectively.
Additionally, it can cover 2500 square feet of distances and allow itself to break all the obstructions. It accesses all the indoor and outdoor corners. Besides, it is ultra-stable and cannot pass its signals through thick walls. Moreover, the setup and the loom extender login are intuitive and breezy as well. Also, it will make your video game or video streaming at another level when you connect to the limitless connection.
A Quick-fix Instructions for the Loom WiFi Extender
Well, the Loom WiFi Extender provides a one-button setup that can install the whole setup function in just a minute. For that, you also do not need to take any technical support. Moreover, it has the potential to connect up to more than thirty devices to the loom wifi booster.
Even after, people still face errors with the installation of the loom extender. So we have selected some of the major problems that occur during the setup and the configuration. Read this section to fix the issues with resolving tips.
The loom wifi booster is connected but you are not receiving the internet connection. Resolve it now!
Nowadays the wifi range extenders have become the ultimate solution. Its main job is to extend the wifi connection to all the corners of the entire house. Moreover, it also improves the wifi speed and strength. But if the loom range extender is connected to the wifi but fails to receive the internet connection. Then there might be disparate reasons.
The first one is an antivirus. So there are viruses or malicious files that lead to the failure in the internet connection. For that, install the antivirus software on a PC. But if you are using a mobile device to operate the system then install the antivirus software into it.
As it is also the best solution to install the program into the mobile. Another reason is the corrupted or wrong DNS server. Make sure that you should use a better internet connection with a better DNS server. In order to solve this error, it’s better to flush the DNS caches. Moreover, you can also use the MAC address filtering or check for the wireless channel. Well, there are elevated chances the loom extenders lag due to network interference. In order to stop it, find a better place and then relocate it.
Methods to reset the Loom wifi range extender to the factory default settings
In order to perform the loom wifi extender reset then you have two methods. From them, you can choose any of them according to your convenience. As the reset can delete all the current or existing settings of your device. Furthermore, you can’t change those settings if you fail to take the backup of the previous settings.
In the first method, you will use the reset button on the panel of the extender. Firstly, take a pin or a paperclip. You can also use your thumb if you don’t have any sharp objects. Therefore, hold the reset button on the extender for more than fifteen seconds. And leave that button when the LED on the device turns red. The red LED indication indicates that the device is now rebooting its settings. You need to wait at that moment. Hence, the loom extender resets successfully.
In the second method, go to the main configuration settings page. Then tap on the management section button. From the drop-down menu click on the system. After that, press on the restore factory defaults button of the range extender. Now a warning message will appear on your screen. By pressing on OK, you will confirm the reset of the range extender.
Why is the host router unable to connect to the Loom range extender?
Well, there are a few reasons that do not let the host router connect to the extender. So you can resolve this issue very easily. You can move the extender closer to the host router. Also, you can build a strong structure that affects the wifi signal. Moreover, you can reposition the loom extender by finding a good location for both of them.
